EOT crane price in India depends on capacity, span, duty class, hoist type, controls and installation, so there is no single list price. Basic marketplace listings for 5 to 10 tonne cranes start at a few lakh rupees, but a quote for your span and duty can differ widely. Send a manufacturer your load, span, lift height and duty cycle for an exact price.
Key takeaways
- There is no fixed EOT crane price: capacity, span, duty class, hoist and installation set the quote.
- Marketplace listings are often 'price on request' or omit span, duty and GST, so they are not like-for-like.
- Compare quotes on the same specification sheet, including runway, installation, testing and GST.
- Total cost of ownership (maintenance, spares, downtime) usually outweighs the first-year price gap.
If you search for the price of an EOT crane in India, you will find listings that range from a couple of lakh rupees to many times that, and many that say only 'price on request'. That is not evasion. An electric overhead travelling (EOT) crane is built to a span, a lift height, a duty class and a building, so two cranes with the same tonnage can be very different machines. This guide explains what moves the price, so that you can compare quotations properly and ask for the right one.
How much does an EOT crane cost in India?
It depends on the specification, and any single number without a span and duty class is misleading. Public marketplace listings for 5 to 10 tonne single girder cranes show prices in the range of roughly two to four lakh rupees for basic units, while many established manufacturers publish no price and quote against your drawings. Listings are indicative only, often exclude GST, runway and installation, and sometimes list inconsistent specifications. Treat them as a starting point, not a budget.
What factors decide the price of an EOT crane?
| Factor | Why it changes the price | Direction |
|---|---|---|
| Safe Working Load (capacity) | Heavier loads need larger girders, wheels, gearboxes and motors | Higher capacity, higher cost |
| Span | Longer spans need deeper girders and more steel; deflection limits get stricter | Longer span, higher cost |
| Girder type | Double girder uses two girders, platforms and a heavier end carriage | Double girder costs more than single |
| Duty class (M3 to M8) | Severe duty needs stronger structure, brakes, gears and wheels | Heavier duty, higher cost |
| Lift height and speeds | Longer rope drum, faster hoisting or VFD drives add cost | Higher lift or speed, higher cost |
| Hoist make and type | Wire rope vs chain, branded vs in-house, fail-safe brakes | Varies widely |
| Controls | Pendant is cheapest; radio remote or cabin add cost | Cabin or radio adds cost |
| Electrics and power feed | Trailing cable, drag chain or DSL bus bar (such as SafeTrack) | DSL adds cost, improves safety |
| Steel and components | Steel prices and component brands move quotations over time | Market dependent |
| Installation, runway, testing, freight, GST | Often excluded from headline prices | Confirm what is included |
Why do 5 ton and 10 ton EOT crane prices vary so much?
Because tonnage is only one input. A 5 ton crane with a 10 m span and light duty and a 5 ton crane with a 25 m span and heavy duty differ in girder size, motor rating and structure. The same applies at 10 tonnes. Cheaper quotes often use a lighter duty class, a shorter assumed span or a lower-grade hoist. Ask each supplier to state the span, lift height, duty class, speeds and hoist make in the quotation so that you are comparing like with like.
Single girder vs double girder: which costs more?
A double girder EOT crane costs more than a single girder of the same capacity, because it uses two girders, platforms and a heavier end carriage. For light and medium loads, a single girder is the economical choice. For heavy or continuous duty, double girder is usually worth it. Our detailed comparison of single girder vs double girder EOT cranes covers when each is right. You can see the specifications on our single girder and double girder product pages.
What should you send a manufacturer to get an accurate quote?
- Safe Working Load in tonnes, including lifting beams and slings.
- Span between runway rail centres, and runway length.
- Height of lift and available headroom under the roof truss.
- Duty cycle: lifts per hour, share at full load, hours per day.
- Control type: pendant, radio remote or cabin.
- Power supply and any special environment: heat, dust, corrosion or hazardous area.
- Site location, for freight and installation planning, plus building drawings if available.
Send these details through our contact page and our team responds within one business day.
What costs are often left out of a headline EOT crane price?
- Runway girders, rails, fasteners and any column strengthening.
- Electrical supply to the runway and the main isolator.
- Freight, unloading and a crane or gantry for erection.
- Installation, load testing and commissioning.
- GST at the applicable rate.
- Annual maintenance contract and spares.
Ask every supplier to list these as included or excluded. A quotation that looks lower often becomes higher once these lines are added.
Is the cheapest EOT crane the best value?
Rarely. A crane that is too light for its duty wears out brakes and wheels early and causes downtime, which costs more than the initial saving. Look at certifications, track record, after-sales support and spare availability as well. Our guide to essential EOT crane safety features lists the protections that should come as standard, not as extras.
Why buy from a manufacturer near you?
Buying direct from a manufacturer removes dealer margins and lets engineers review your building. GR Cranes & Elevators manufactures in Focal Point, Ludhiana, and delivers and installs across Ludhiana, Chandigarh, Mohali, Dera Bassi and Ambala, as well as the wider north India belt. We have been building since 1998, are ISO certified and are an authorized EOT crane builder for the Bajaj Group of Companies. See our projects and company profile.
Frequently asked questions
What is the price of a 5 ton EOT crane in India?
There is no single price, because span, duty class, lift height and installation change the quote. Basic marketplace listings start at a few lakh rupees, but you need a quotation against your own specification for a reliable figure.
What is the price of a 10 ton EOT crane?
A 10 ton crane price depends on whether it is single or double girder, the span, the duty class and the hoist. Listings often show 'price on request'. Share load, span, lift height and duty cycle with the manufacturer to receive a specific quote.
Why is EOT crane price not listed on most websites?
Because every EOT crane is built to a span, lift height and duty class. Publishing one price would mislead buyers. Reputable manufacturers quote against your drawings after confirming these details.
Does the EOT crane price include installation and GST?
Not always. Many headline prices exclude installation, runway, electrical supply, freight and GST. Ask for a quotation that states clearly what is included and what is not.
Is a double girder EOT crane more expensive than a single girder?
Yes. It uses two girders, platforms and a heavier end carriage. The extra cost is usually justified for heavy loads, continuous duty or when maximum hook height is needed.
How can I reduce the cost of an EOT crane without losing safety?
Specify the duty class honestly, avoid oversizing capacity, keep the span as short as the building allows and choose pendant control if cabin operation is not needed. Do not remove protections such as overload limiters, limit switches and emergency stop.
Where can I get an EOT crane quotation in Ludhiana or Punjab?
GR Cranes & Elevators, Focal Point, Ludhiana, manufactures EOT cranes and responds to quotation requests within one business day. Use the contact page or call +91-98140-85890.
Sources and standards
- Indicative marketplace listings reviewed 2026-10-27 (TradeIndia and similar), used only to illustrate range and absence of standard pricing
- TIL India, 'How to determine the cost of a crane in India' (cost factor overview)
- GR Cranes product specifications and contact details, verified 2026-10-27
About GR Cranes & Elevators: ISO-certified EOT crane manufacturer in Focal Point, Ludhiana, Punjab, operating since 1998 and an authorized EOT crane builder for the Bajaj Group of Companies. Serving Ludhiana, Chandigarh, Mohali, Dera Bassi, Ambala and pan-India installations. Phone +91-98140-85890, info@grcranes.com.